LED RGB SOFT-NEON TM LIGHT Specification
Patented!!!
Dimming Color or Changing Color
Item No. |
Size(mm) |
Input Voltage |
LED Space |
No. of LED
per unit |
Length
per unit |
Power
per unit |
Tube Color |
LED Color |
LED-SRN-220V-RGB |
20X26 |
220V |
12.5mm |
216 |
910mm |
11W |
Milk White |
RGB |
LED-SRN-120V-RGB |
20X26 |
120V |
12.5mm |
108 |
457mm |
5.8W |
Milk White |
RGB |
LED-SRN-24V-RGB |
20X26 |
24V |
12.5mm |
18 |
76mm |
1.2W |
Milk White |
RGB |
Accessories: Power Convertor, Power Connector, Middle Connector, Extension Connector, End Cap, Mounting Clip, Mounting Channel, Double-side Tape and glues.
Installation Mode:
The RGB LEDSOFT-NEON LIGHT is a versatile and user-friendly lighting device. It can be cut, bent and easily installed on the flat surface of various materials, such as wood, plastic, steel, or wall, etc. to form all kinds of pattern according to your design. And it can be easily connected to the power supply and then perform well.
1. It is recommended to mark centerlines or draw the outline of your pattern on the surface of your desired positions.
2. Secure mounting clips along the centerlines at appropriate intervals with screws. If there are curves, it is better to secure a mounting clip on and between each curve.
3. Insert the light body into the mounting clips with the lighting parts upward.
4. Connect each part together.
1. Cutting mark |
2. Linear installation |
3. Curve installation |
4. 90o Installation |
|
|
|
|
LED-SRN Must be cut only on the
indicated mark |
Includes:
Channel LED-SRN-ALMC-RGB |
Includes:
1.Channel LED-SRN-ALMC-RGB
2. Screw |
Includes:
1. Channel LED-SRN-ALMC-RGB
2. Screw |
| |
|
|
|
5. 180o Installation |
6. Convex installation |
7. Concave installation |
8. Installation with the slot |
|
|
|
|
Includes:
1. Channel LED-SRN-ALMC-RGB
2. Screw |
Includes:
Channel LED-SRN-ALMC-RGB |
Includes:
Channel LED-SRN-ALMC-RGB |
Press LED-SRN into the slot of the installation |
|
